magnorail

Content: 1 wheel

Content: 1 pair (2 pieces)

Magnet finder to locate the magnets in the Magno track chain below the road surface.

Very handy to place cyclists and cars on your already painted and decorated road.

Renovierungssatz blaue Kette für System Magnorail, 10 Einheiten.

Dieser Satz erlaubt Ihnen, Ihre alte rote Kette auf einer 186 cm Länge zu ersetzen, er enthält keinen Führungsweg.

Vehicle sander for Magnorail System (8 pieces), with magnets and a 1mm drill.

4 small car grinders for cars in scale N and Z and 4 large ones for cars in scale H0 and TT

Extension set for Magnorail system, with 60 cm chain guide.

The blue chain is compatible with the old red chain, but the position of the magnets will be reversed.

2 boats in resin for system Magnorail. Included is a small 65 mm motorboat for scale HO, an 82 mm boat for scale N, a piece of sanding paper for finishing and a drill.

Content: 1 bicycle with figure (assembled and painted)

2 bicycles with 2 figures (man and woman)

Content: 1 bicycle with figure (assembled and painted)

Content: 1 bicycle with figure (assembled and painted)

The cyclist's body is 3D printed, completely assembled and hand painted.

2 Kerb loops (180°) with chain for Magnorail system.

Brown brass frame, cyclist and resin bucket. Hand painted and mounted.

The trailers and the bike are articulated for more realism.

Brown brass frame, cyclist and resin bucket. Hand painted and mounted.

The trailers and the bike are articulated for more realism.

Brown brass frame, cyclist and resin bucket. Hand painted and mounted.

The cool box and the bike are articulated for more realism.

Brown brass frame, cyclist and resin bucket. Hand painted and mounted.

Drive module for Magnorail system with adjustable 12V DC motor (slow speed for the boats), their supports and the sprockets for the entrainment of the chain.

An inspection pit of at least 100x50 mm must be provided for access to the motor and chain.

Drive module for Magnorail system with a new generation mid-speed motor 12V DC for the movement of cyclists from 6V, their carriers and the gears for the entrainment of the chain.


An inspection pit of at least 100x50 mm must be provided for access to the engine and chain.